1.light weight, high strength
2. sustainable and enviroment friendly
3. reusable more than 30 times
our PVC plastic ribbed construction formwork is newly developed shuttering panel for concrete pouring works for construction industry. Because it is light, strong, durable, reliable, much longer service life ( reuse more than 30 times), it can be cut by saw, nailed just same as plywood board, very convenient and simple to use, very fast to assemble, can be reclaimed and no pollution to environment, and since its length can be tailor-made as per clients request, thus it is widely used at civil building construction sector, and it is sustainable best formwork and very good at constructing overhead concrete bridge/high way/ railway where need single piece length much longer and enough strong and light concrete shuttering board. This type is PVC ribbed board . The maximum width for single piece is 610mm, the length can be customized as per your request. If you need narrower than 610mm, we will cut it to your requested width; if you need wider than 610mm, it will be joint together by several pieces ( for example, when you need 1000mm wide, you can use one piece 610mm plus another piece 390mm) Its thcikness is 65mm ( 12mm surface plus 53mm rib) As to the length, we can make it any long up to 6m. The unit price is USD33 per square meter. Hope this type of construction formwork panel can bring you more benifit. The reason I suggest you this type plastic formwork board are as following:
1. It is very durable because of the ribbed structure. The board surface is 12mm thick. Along the width of 610mm, there integrated are 10 ribbs, which is 12mm thick and 53mm high, reinforce the surface panel. So the rigidness and strength is very high. They are very durable and reusable 40 times and even much more.
2. Thanks to the ribbs integrated on the formwork board, a lot of stringer, which must be necessary if you use plain boards which have no ribs as reinforcements, are saved. So using this type of ribbed formwork board, it is not only more easy and much faster to erect /assemble the formwork system, but also save a lot of materials.
3. The density of the material is about 0.65g/cm3, the board weigh about 13kg per square meter, hence it is very light and very easy and convenient for worker to handle.
4. The surface is very hard and very smooth. The surface wear resistance is excellent. Due to the surface is very smooth and water repellent, it is very easy to remove the formwork from cured concrete surface. The demoulding agent can be saved and a lot of labour works to remove the shuttering panel can be saved. The concrete surface is very nice and unnecessary to repair the concrete surface with mortar.
5. After their service life, the formwork board and waste can be recycled. Therefore there is no pollution to environment. It is eco-friendly sustainable economical shuttering boards for concrete casting works.
5. The width of the formwork board is 610mm wide, the length can be costomized as long as clients request. If less width than 610mm is necessary, we can cut 610mm width into the necessary width.
6. The boards have tongue and groove joint, and equipped with clamps, hence the boards can be assembled very easy and very fast.
7. Due to the structure of the tongue and groove , the external (male) corner formwork is unnecessary. We have internal (female) corner which is made of same material and same process.